DJIDronesEnterprise DronesPhantom 4 RTK

Visionary Intelligence.
Elevated Accuracy.

  • Description
  • Specifications

Description

Next Generation Mapping

DJI has rethought its drone technology from the ground-up, revolutionizing its systems to achieve a new standard for drone accuracy – offering Phantom 4 RTK customers centimeter-accurate data while requiring fewer ground control points.

RTK Horizontal Positioning Accuracy

01234567890cm+01234567890ppm

RTK Vertical Positioning Accuracy

01234567890.01234567890cm+01234567890ppm

Absolute Horizontal Accuracy
of Photogrammetric Models

01234567890cm

We Use Various Technologies & Products To
Get The Best Results

Once you rent our aircraft by itself, you’ll
save on an extra battery.

PRODUCT QUALITY

CAMERA

SPEED

24/7 SUPPORT

https://www.linkedall.com/wp-content/uploads/2020/12/download.png

Centimeter Level Positioning System

A new RTK module is integrated directly into the Phantom 4 RTK, providing real-time, centimeter-level positioning data for improved absolute accuracy on image metadata. Sitting just beneath the RTK receiver is a redundant GNSS module, installed to maintain flight stability in signal-poor regions such as dense cities. Combining both modules, the Phantom 4 RTK is able to optimize flight safety while ensuring the most precise data is captured for complex surveying, mapping and inspection workflows.

Fit the Phantom 4 RTK to any workflow, with the ability to connect this positioning system to the D-RTK 2 Mobile Station, NTRIP (Network Transport of RTCM via Internet Protocol) using a 4G dongle or WiFi hotspot, or store the satellite observation data to be used for Post Processed Kinematics (PPK).
https://www.linkedall.com/wp-content/uploads/2021/03/dj.jpg

Gather Accurate Data with TimeSync

To take full advantage of the Phantom 4 RTK’s positioning modules, the new TimeSync system was created to continually align the flight controller, camera and RTK module. Additionally, TimeSync ensures each photo uses the most accurate metadata and fixes the positioning data to the center of the CMOS – optimizing the results from photogrammetric methods and letting the image achieve centimeter-level positioning data.

Gather Accurate Data with TimeSync

To take full advantage of the Phantom 4 RTK’s positioning modules, the new TimeSync system was created to continually align the flight controller, camera and RTK module. Additionally, TimeSync ensures each photo uses the most accurate metadata and fixes the positioning data to the center of the CMOS – optimizing the results from photogrammetric methods and letting the image achieve centimeter-level positioning data.
https://www.linkedall.com/wp-content/uploads/2021/03/dj.jpg
https://www.linkedall.com/wp-content/uploads/2020/12/download-3.png

Precise Imaging System

Capture the best image data with a 1-inch, 20 megapixel CMOS sensor. Mechanical shutter makes mapping missions or regular data capture seamless as the Phantom 4 RTK can move while taking pictures without the risk of rolling shutter blur. Due to the high resolution, the Phantom 4 RTK can achieve a Ground Sample Distance (GSD) of 2.74 cm at 100 meters flight altitude. To ensure each Phantom 4 RTK offers unparalleled accuracy, every single camera lens goes through a rigorous calibration process where radial and tangential lens distortions are measured. The distortion parameters gathered are saved into each image’s metadata, letting post-processing software adjust uniquely for every user.
https://www.linkedall.com/wp-content/uploads/2020/12/download-4.png

Purpose-Built Flight Planning Application

A new GS RTK app allows pilots to intelligently control their Phantom 4 RTK, with two planning modes – Photogrammetry and Waypoint Flight – alongside a more traditional flight mode. The planning modes let pilots select the drone’s flight path while adjusting overlap rate, altitude, speed, camera parameters and more, offering an automated mapping or inspection workflow.
The GS RTK app has been built with its users in mind and therefore has a range of features built for specific mapping or inspection workflows. The app has implemented direct loading of KML area files for in-office flight planning, a new shutter priority mode to keep exposure consistent across all photos and a strong wind alarm to warn pilots of adverse conditions.

Purpose-Built Flight Planning Application

A new GS RTK app allows pilots to intelligently control their Phantom 4 RTK, with two planning modes – Photogrammetry and Waypoint Flight – alongside a more traditional flight mode. The planning modes let pilots select the drone’s flight path while adjusting overlap rate, altitude, speed, camera parameters and more, offering an automated mapping or inspection workflow.
The GS RTK app has been built with its users in mind and therefore has a range of features built for specific mapping or inspection workflows. The app has implemented direct loading of KML area files for in-office flight planning, a new shutter priority mode to keep exposure consistent across all photos and a strong wind alarm to warn pilots of adverse conditions.
https://www.linkedall.com/wp-content/uploads/2020/12/download-4.png
https://www.linkedall.com/wp-content/uploads/2021/03/Applications.jpg

Access a Variety of 3rd Party Applications

Pilots with experience using 3rd party apps on DJI drones can access the world’s leading drone app ecosystem for their Phantom 4 RTK with the SDK Remote Controller. Users can plug in a compatible Android or iOS device and install any compatible DJI Mobile SDK-enabled app to harness the full power of their Phantom 4 RTK.

OcuSync Transmission System

Enjoy stable and reliable HD image and video transmission at distances of up to 7 km, great for mapping larger sites*.

*Unobstructed, free of interference, when FCC compliant. Maximum flight range specification is a proxy for radio link strength and resilience. Always fly your drone within visual line of sight unless otherwise permitted.
https://www.linkedall.com/wp-content/uploads/2021/03/sync.jpg
https://www.linkedall.com/wp-content/uploads/2021/04/P4RTK-Website-Assets-4.jpg

Seamless Compatibility with D-RTK 2 Mobile Station

Support your Phantom 4 RTK missions with the D-RTK 2 Mobile Station – providing real-time differential data to the drone and forming an accurate surveying solution, or acquire accurate location coordinates when used as an RTK rover. The Mobile Station’s rugged design and OcuSync transmission system ensures you can gain centimeter-level accurate data with your Phantom 4 RTK in any condition.

APPLICATIONS

Mapping and Surveying

Construction

Natural Resource Management

Contact Us

    Specifications

    Aircraft
    Takeoff Weight 1391 g
    Diagonal Distance 350 mm
    Max Service Ceiling Above Sea Level 19685 ft (6000 m)
    Max Ascent Speed 6 m/s (automatic flight); 5 m/s (manual control)
    Max Descent Speed 3 m/s
    Max Speed 31 mph (50 kph)(P-mode)
    36 mph (58 kph)(A-mode)
    Max Filght Time Approx. 30 minutes
    Operating Temperature Range 32° to 104° F (0° to 40℃)
    Operating Frequency 2.400 GHz to 2.483 GHz (Europe, Japan, Korea)
    5.725 GHz to 5.850 GHz (United States, China)
    Transmission Power (EIRP) 2.4 GHz
    CECE (Europe) / MIC (Japan) / KCC (Korea) :< 20 dBm
    5.8 GHz
    SRRC(China) / FCC(United States)/(Taiwan,China):< 26 dBm
    Hover Accuracy Range RTK enabled and functioning properly:
    Vertical:±0.1 m;Horizontal:±0.1 m
    RTK disabled
    Vertical:±0.1 m(with vision positioning );
    ±0.5 m(with GNSS positioning)
    Horizontal:±0.3 m(with vision positioning);
    ±1.5 m(with GNSS positioning)
    Image Position Offset The position of the camera center is relative to the phase center of the on-board D-RTK antenna under the aircraft body’s axis:(36, 0, and 192 mm) already applied to the image coordinates in Exif data. The positive x, y, and z axes of the aircraft body point to the forward, rightward, and downward of the aircraft, respectively.
    Mapping Functions
    Mapping Accuracy ** Mapping accuracy meets the requirements of the ASPRS Accuracy Standards for Digital Orthophotos Class Ⅲ
    ** The actual accuracy depends on surrounding lighting and patterns, aircraft altitude, mapping software used, and other factors when shooting.
    Ground Sample Distance(GSD) (H/36.5) cm/pixel,
    H means the aircraft altitude relative to shooting scene (unit: m)
    Data Acquisition Efficiency Max operating area of approx. 1 km² for a single flight(at an altitude of 182 m, i.e., GSD is approx. 5 cm/pixel, meeting the requirements of the ASPRS Accuracy Standards for Digital Orthophotos Class Ⅲ
    Vision System
    Velocity Range ≤31 mph(50 kph) at 6.6 ft(2 m) above ground with adequate lighting
    Altitude Range 0-33 ft(0 – 10 m)
    Operating Range 0-33 ft(0 – 10 m)
    Obstacle Sensing Range 2-98 ft(0.7-30 m)
    FOV Forward/Rear: 60° (horizontal), ±27° (vertical)
    Downward: 70° (front and rear), 50° (left and right)
    Measuring Frequency Forward/Rear:10 Hz;
    Downward: 20 Hz
    Operating Environment Surfaces with clear patterns and adequate lighting(> 15 lux)
    Camera

    Sensor1″ CMOS; Effective pixels: 20M

    Lens FOV 84°;8.8 mm / 24 mm(35 mm format equivalent:24 mm);
    f/2.8 – f/11, auto focus at 1 m – ∞
    ISO Range Video:100-3200(Auto)
    100-6400(Manual);
    Photo:100-3200(Auto)
    100-12800(Manual)
    Mechanical Shutter Speed 8 – 1/2000 s
    Electronic Shutter Speed 8 – 1/8000 s
    Max Image Size 4864×3648(4:3);
    5472×3648(3:2)
    Video Recording Modes H.264,4K:3840×2160 30p
    Photo Format JPEG
    Video Format MOV
    Supported File Systems FAT32(≤ 32 GB);
    exFAT(> 32 GB)
    Supported SD Cards MicroSD, Max Capacity: 128 GB. Class 10 or UHS-1 rating required Write speed≥15 MB/s
    Operating Temperature Range 32° to 104° F (0° to 40℃)
    Intelligent Flight Battery(PH4-5870MAH-15.2V)
    Capacity 5870mAh
    Voltage 15.2V
    Battery Type LiPo 4S
    Energy 89.2 Wh
    Net Weight 468 g
    Charging Temperature Range 14° to 104℉(-10° to 40℃)
    Max charging Power 160W
    Intelligent Battery Charging Hub (WCH2)
    Input Voltage 17.3 – 26.2 V
    Output Voltage and Current 8.7 V,6 A;5 V,2 A
    Operating Temperature 41° to 104℉(5° to 40℃)
    GNSS
    Single-Frequency, High-Sensitivity GNSS Module GPS+BeiDou+Galileo*(Asia);
    GPS+GLONASS+Galileo*(other regions)
    Multi-Frequency Multi-System High-Precision RTK GNSS Frequency Used:
    GPS:L1/L2;
    GLONASS:L1/L2;
    BeiDou:B1/B2;
    Galileo*:E1/E5a
    First-Fixed Time:< 50 s
    Positioning Accuracy: Vertical 1.5 cm + 1 ppm(RMS);
    Horizontal 1 cm + 1 ppm(RMS)
    1 ppm means the error has a 1mm increase for every 1 km of movement from the aircraft.
    Gimbal
    Stabilization 3-axis (tilt, roll, yaw)
    Pitch -90° to +30°
    Max Controllable Angular Speed 90°/s
    Angular Vibration Range ±0.02°
    Infrared
    Obstacle Sensing Range 0.6-23 ft(0.2 – 7 m)
    FOV 70°(Horizontal)
    ±10°(Vertical)
    Measuring Frequency 10 Hz
    Operating Environment Surface with diffuse reflection material, and reflectivity> 8%(such as wall,trees, humans, etc.)
    SDK Remote Controller
    Operating Frequency 2.400 GHz to 2.483 GHz (Europe, Japan, Korea)
    5.725 GHz to 5.850 GHz (Other countries/regions)
    EIRP 2.4 GHz
    CE / MIC / KCC:< 20 dBm
    5.8 GHz
    SRRC / FCC:< 26 dBm
    Max Transmission Distance FCC:4.3 mi(7 km);
    SRRC / CE / MIC / KCC:3.1 mi(5 km) (Unobstructed, free of interference)
    Built-in Battery 6000 mAh LiPo 2S
    Operating Current / Voltage 1.2 A @ 7.4 V
    Mobile Device Holder Tablets and smartphones
    Operating Temperature 32° to 104° F (0° to 40° C)
    Remote Controller
    Operating Frequency 2.400 GHz-2.483 GHz(Europe,Japan,Korea)
    5.725 GHz-5.850 GHz(United States, China)
    Transmission Power (EIRP) 2.4 GHz
    CE / MIC / KCC:< 20 dBm
    5.8 GHz
    SRRC / FCC:< 26 dBm
    Max Transmission Distance FCC:4.3 mi(7 km);
    SRRC / CE / MIC / KCC:3.1 mi(5 km) (Unobstructed, free of interference)
    Power Consumption 16 W(typical value)
    Display 5.5 inch screen, 1920×1080, 1000 cd/m², Android System
    Memory 4G RAM+16G ROM
    Operating Temperature Range 32° to 104° F (0° to 40℃)
    Intelligent Flight Battery Charging Hub (PHANTOM 4 CHARING HUB)
    Voltage 17.5 V
    Operating Temperature Range 41° to 104℉(5° to 40℃)
    Capacity 4920mAh
    Voltage 7.6V
    Battery Type LiPo 2S
    Energy 37.39Wh
    Operating Temperature -4° to 104℉(-20° to 40℃)
    AC Power Adapter (PH4C160)
    Voltage 17.4V
    Rated Power 160W

      Reviews

      There are no reviews yet.

      Be the first to review “Phantom 4 RTK”

      https://www.linkedall.com/wp-content/uploads/2020/09/400_X_100_410x_sm_XS.png
      We specialize in end-to-end business solutions for UAV Operations. We offer the latest hardware, software, accessories, and up to date training for Enterprise applications. We cater to multiple industries such as Oil & Gas, Public Safety, Infrastructure, Agriculture, and many more. Let us help you build and scale your UAV program!

      SUBSCRIBE NOW